Product Details
- Fast Flex
- Fast Flex Fixings offer the installation ease of a nail with the performance capabilities of a screw. Originally designed for fixing timber to aircrete blocks, their versatility enables them to be used for securing skirting boards, battens, coping stones, door frames and gate posts.
- Skew Fast
- Skew Fast fixings are designed specifically for use in warm roof applications. Fixing through the counterbatten, the insulation and into the rafter, they are designed to cope with both wind suction and the sliding loads.
- Dri Flex
- The stress free fixing enables Dri Flex remedial wall ties to be used in many and varied types of masonry from poured concrete to Devon cob.
- Retro Flex
- The stress free fixing enables Retro Flex remedial wall ties to be used in many and varied types of masonry from reinforced concrete to Devon cob.
- Resi Flex
- The Resi Flex system of wall tie replacement is available in 4.5mm diameter. It offers the advantages of a non-expanding resin fix on both the near and far leaf through a 8mm rotary-percussion drilled hole - eliminating spalling of the brickwork.
- Cemen Flex
- A cementitious grout bonded remedial wall tie suitable for use in hollow materials and in areas of fire risks.
- Cem Flex
- To reconnect delaminating solid masonry involves the introduction of a Cem Flex tie. Installed through 12-16mm holes there is minimal disfiguration and a very rapid installation. The grout encapsulating the tie may also be used to restrain and bond rubble-filled sections.
- Bow Flex
- To connect the floor joists to the structure Bow Flex ties are installed from outside the building through 12mm holes. The Bow Flex ties may be proof tested after installation and work well into either the end grain or the side grain of the joists.
- Bar Flex
- Manufactured from Grade 304 austenitic stainless steel, Bar Flex is the backbone of the whole system. The rolling process increases the tensile strength of the base material by a factor of two. Within its linear elastic range it has similar properies to a strong coiled spring.
- Heli Pile ®
- Used in combination with the Target beaming system the Heli Pile is very quick and easy to install giving an efficient and cost-effective solution.
- Bond Flex
- A non-shrink, pumpable, thixotropic, cement-based grout, Bond Flex XL is suitable for injection with a hand or power applicator. Specially developed with all these characteristics it is the ideal bonding agent for installing Bar Flex and Cem Flex ties.
- Polyester Resin
- The Target Polyester Resin is a general purpose, two part, styrene-based resin with an oil-based catalyst. The 10:1 ratio is extruded with a hand applicator through a mix-in-the-nozzle system which produces a distinct colour change when the two components are properly mixed.
