Target Fixings Limited

Bond Flex XL is suitable for bonding metal components into most masonry substrates including concrete, brick, stone, blocks and most masonry materials. It is designed for use with the other Target products Bar Flex, Cem Flex, Retro Flex as a bonding agent. Further details are given by following those links.

Bond Flex XL has been found to be an ideal alternative product to polyester resin and is particularly useful when fire risks are an issue - replacement wall ties on high-rise structures is a good example. Being non-flammable and odourless Bond Flex does not have the inherent drawbacks of many resin-based alternatives.

The packaging of Bond Flex XL ensures that consistent results are obtained with every mix. There is nothing to leave out, and, more importantly, nothing to add. Contractor error has been eliminated.

Although packaged in the same 16 litre bucket for a clean mix every time, for extra convenience Bond Flex XL is available in two different sizes. XL3 contains enough mixture for 3 litres of grout whilst XL6 contains two packs of each XL3 component and hence produce 6 litres of usable grout.

Bond Flex XL buckets may be stacked up to 4 high and should be kept in dry conditions. A temperature range of 5°C to 35°C is ideal and should be maintained.

The typical compressive strength development at 20°C, 100mm cubes cast under restraint and wet cured is given in the table below.

• Thixotropic. Will not drip when used overhead.
• Non-shrink property increases bond stress.
• Full packaged for consistent mixing.
• Easily pumpable over long distances.
• Fills voids when injected.
• Non-flammable material.