Cem Flex
Originally developed in conjunction with British Rail, the Cem Flex method of pinning delaminated rings in masonry arches has now become widely accepted as a simple and economic solution.
Cem Flex ties are also used in standard construction repair techniques for bonding across cracks in masonry and as a restraint for bowing solid walls.
The 8mm diameter austenitic Grade 304 stainless steel helical reinforcing rod is combined with Bond Flex XL, a unique formula of pumpable, but thixotropic, non-shrink cementitious grout.
As the installation of Cem Flex is via a 12 to 16mm diameter drilled hole, the potential disfiguration to the structure can be minimised, and the installation time is greately reduced - this is especially important where access and working times are restricted.
NOTE: Carriage is charged at £10 (ex VAT) on orders under £150 (ex VAT)
Bond Flex
Bond Flex XL cementitious grout is a non-shrink, pumpable, thixotropic, high performance, cement-based grout suitable for injection with a hand applicator.
Supplied in a 16 litre bucket, Bond Flex XL contains the dry powder and liquid component individually packed to make either 3 or 6 litres of injectable grout.
The low liquid to powder ratio ensures a thixotropic grout which develops it's compressive strength rapidly. It is designed to fill all the voids into which it is injected and the bond stress is greatly enhanced by it's expansive properties.
NOTE: Carriage is charged at £10 (ex VAT) on orders under £150 (ex VAT)
Bond Flex - Cem Flex Accessories
The pointing gun complete is required for use with the Cem Flex pinning nozzle. It includes the gun, plastic cone nozzle and plastic inside tube.
The Cem Flex pinning nozzle is a nozzle that goes round the outside of the installed Cem Flex in order to provide a cementitious fix down the complete length.
NOTE: Carriage is charged at £10 (ex VAT) on orders under £150 (ex VAT)
× has been your basket.
You currently have: × in your basket.
|